Description
8 Stages Ultratec RO System with Anti-Microbiological & Alkaline
Following are the Step by Step 8 stages
Ø Stage 1 Sediment Filter: Sediment filter is to filter dust, rust, algae, fungus & other heavy contamination from water. (Polypropylene-5 Micron) .Filter change of period is 4 to 6 months.
Ø Stage 2 G.A.C Filter: Granular Activated Carbon Filter to remove all the chemicals, preservatives & Bad Odor from water.
Ø Stage 3 Dual Purpose Filter: With only 1 micron rating, provides effective filtration to protect your membrane. It provides for improved membrane performance up to 95% of TDS rejection.
Ø Stage 5 Post Carbon: This carbon post filter removes objectionable tastes and odors to enhance the quality of your drinking water. We are using NSF approved post carbon to guarantee the taste of water.
Ø Stage 7 Anti-Microbiological : It can destroy 99.99% of harmful microorganisms without adding chemicals or changing your water’s taste or odor?! It is one of the four methods of disinfection approved by the United States FDA.
Ø Stage 8 Alkaline: Increase the pH of teh filtered water typically to between 8.5 to 9.5. Changing the oxidation/ reduction potential of the water (ORP) to between -100mV and -250mV.
Ø Stage 6 Mineral Tube: To energize the water with Essential Natural Minerals. It has natural minerals Coral reef, Coral Sand, natural active calcium, Bio ceramic balls.
Ø Stage 4 R.O Membrane: Filter (U.S.A) it has 0.0001 Micron poses. And 12 to 14 time fine the water.
FAQs:
Q1: How often should I replace the filters in the 8 Stages RO System?
A: The frequency of filter replacement depends on the water quality and usage. As a general guideline, it is recommended to replace the Stage 3 Dual Purpose Filter every 6-12 months, the R.O Membrane (Stage 4) every 2-3 years, the Post Carbon Filter (Stage 5) every 12 months, and the Anti-Microbiological Filter (Stage 7) every 6-12 months. The Mineral Tube (Stage 6) and Alkaline Filter (Stage 8) typically have a longer lifespan, and their replacement may be needed every 2-3 years. Regular monitoring of water quality and adherence to the manufacturer’s recommendations are crucial for optimal performance.
Q2: Can the Alkaline Filter 8 Stage significantly change the taste and pH of the filtered water?
A: Yes, the Alkaline Filter 8 Stage is designed to increase the pH of the filtered water, typically ranging between 8.5 to 9.5. This adjustment changes the oxidation/reduction potential (ORP) of the water to a level between -100mV and -250mV. Not only does this enhance the taste by reducing acidity, but it also introduces essential natural minerals, providing a refreshing and health-conscious drinking water experience.